Regular maintenance tasks are presented in the following table. If you feel confident enough, you can perform all these tasks yourself. If not, please contact your local Axopar dealer for help.
Depending on vessel model and components, every task might not be relevant.
|
MAINTENANCE LOG |
Frequency |
||||
|---|---|---|---|---|---|
|
Task to be performed |
Every trip |
Every month |
Every 3 months |
Every 6 months |
Annually |
|
Bilge system |
|
||||
|
Waste system - Replace the no-smell carbon filters |
|
||||
|
Waste system - Run the macerator pump |
|
||||
|
Heating system - Run the heater for 10 minutes |
|
||||
|
Air conditioning system - Clean air filter, seawater strainer and check the system for leaks |
|
||||
|
Water system - Clean inline filter |
|
||||
|
Inspect Zinc anodes |
|
||||
|
Fire extinguisher inspection |
|
||||
|
CO alarm - Push test button for 1 sec |
|
||||
|
Smoke alarm - Push test button for 3 sec |
|
||||
|
Seacocks - Turn handle Open and Close |
|
||||
|
Batteries - Charge state, terminals securely attached and free from corrosion |
|
||||
|
LPG system - Check condition of LPG lines, connectors and LPG shut off valve |
|
||||
|
Fuel system - Check condition of fuel lines, connectors and fuel shutoff valves |
|
||||
|
Inspect fuel tank compartment bilge for water |
|
||||
|
Livewell pump - Check condition of hoses and connectors |
|
||||
|
Gelcoat waxing |
|
||||
|
Clean hull & deck from saltwater |
|
||||
|
Keep bilge dry and clean |
|
||||
|
Boat covers - Clean upholstery covers and sunroof cover |
|
||||
