The warm water system consists of a water boiler and associated hardware.
The water boiler is located in the bow of the boat, behind a sealed hatch in the anchor box.
-
To reach the boiler, unscrew the screws in the service hatch.
-
Switch on the water boiler from the switchboard located in the anchor box.
-
-
Switch on the fresh water pump before switching on the water boiler.
-
Operating the water heater empty damages the system.
-
-
-
Adjust the water temperature by rotating the thermostat dial mounted on the boiler.
Water might reach scalding temperature if the thermostat is set to high setting (above 5).
For more information on the thermostat adjustment, see the manufacturer’s manual.
See the manufacturer's manual for maintenance instructions for the water boiler. Inspect the boiler's hose connections regularly for signs of leaks.